Size: Medium 51.00" x 21.00"
Accommodates riders between 100-150 lbs.
Resin:
EPOXY resin is used throughout the laminating process to ensure the strength and durability of the laminate. This stiffens the boMedard and makes it stronger.
Carbon:
Full-Coat and Double Wrapped Rails
Carbon is the finest alternative in the skimboard industry for strength and stiffness. With the combination of E.C.S. Epoxy Construction, these boards are some of the strongest and stiffest products on the market, designed for riders giving it their all in any condition from waist high Florida to juicy barrels in California.
Constant Rocker:
Rocker: Nose: 2.25" - Tail: 0.875"
The waves reachable by skimboarders are so close to shore that they are constantly changing speed and shape due to the shifting slope on the ocean-floor. This often times makes it very difficult for skimboarders to predict what the wave is going to do as you approach the shore. Our constant rocker board is designed to not only improve strength in power turns, wraps, and bottom-turns, but also to regulate stability in the pocket of the wave. Almost all riders who enjoy spending time in the barrel prefer a constant rocker to hold them in the pocket with 'ease'.
Thickness:
Nose: 0.875" - Mid-Section: 1" - Tail: 0.625"
East Coast Skimboards supplies the first ever skimboards that not only vary in rocker, but also in thickness throughout. For years skimboard manufacturers have been searching for a way to utilize a thinner board to lower weight without compromising float. This had led to the division of boards into categories of either 5/8", 3/4", or 1". With East Coast Skimboards you can have all 3 in 1. Typically while sliding out to a wave the flattest part of your board, and therefore where you balance most of your weight, is between the center of your board and your front foot. This is where we utilize 1" of thickness to ensure lots of float. The rest of the nose is tapered to 0.875" to reduce weight. The back end of the board is designed with 0.625" of thickness to give the rider a paper-thin feel with added maneuverability. Not only does it reduce the weight of the board but with the combination of it's thin-feel and the tail rocker it is the perfect board for power turns, big wraps, and steez in the green room. Or the brown room if you're in New Jersey.
|